Epoxy Floor Coatings
We grind the slab first so the epoxy bites into open concrete. Then we build the coats up thick enough to shrug off the sand and grit Marina garages and workshops pick up.
Flooring contractor in Marina, CA - garage and shop floors prepped right before coating
Truefinish Monterey Epoxy Flooring is a flooring contractor from Monterey that preps, coats and polishes concrete floors in Marina, CA, from sandy garages and basements to patios, pool decks and busy shop floors.
What we run into on Marina concrete floors
We're a flooring contractor based in Monterey, and Marina's a short drive north, so we're up here a lot for garages, workshops and the odd basement. The first thing we notice is sand. It blows in off the dunes and rides in on shoes and tires, and that grit works like sandpaper on a soft finish, so we plan the topcoat for wear and not just looks. It's much the same story next door in Seaside and up the road in Castroville.
The price mostly comes down to the size of the floor, the shape the slab's in and the system you choose. Old coatings to strip, oil stains, cracks and extra grinding all add work, while a sealer or a polish usually costs less than a full coated system. The schedule depends on what the slab test shows, how much repair comes first and how long your coating needs to cure, and your estimate lays out both for your floor.
Cracks get dealt with first
The city notes Marina sits in a very active seismic area, and slabs here do crack. So we look at every crack before planning a coating, since one left alone usually shows back through.
Prep before the first coat
Most floors that peel or bubble were rushed before the first coat went on, so we grind, clean and repair the concrete first, even when that's the slowest part of the job.
A Marina business license comes first
Before Marina's Building Division will issue a permit, the contractor has to hold a City of Marina business license. If your job needs a permit, ask whoever you hire whether they have one.
Concrete floor work we do in Marina
Commercial & Industrial Epoxy Floor Coatings
For shops, warehouses and work bays around Marina, we pick a coating system for what rolls across it, whether that's forklifts, carts or steady foot traffic, and we work around your hours.
Garage Floor Coatings
Garages here collect sand off shoes, tires and beach gear. So we prep the slab, fill the cracks and choose a topcoat built to take grit and hot tires.
Polyaspartic Floor Coatings
Polyaspartic cures much faster than standard epoxy, so you get your garage back sooner. It also sets fast enough that the prep has to be finished before we open a can.
Metallic Epoxy Flooring
Metallic epoxy swirls pigment through the coat for a deep, glossy look in living spaces and showrooms. Every floor turns out a little different, so we'll show you samples first.
Urethane Cement Flooring
Urethane cement handles heat, hot washdowns and heavy impact. That makes it what we suggest for commercial kitchens and food plants, where a standard epoxy would wear out too soon.
Polished Concrete Flooring
If your slab is in decent shape, polishing can be the simpler option. We grind and harden the concrete itself, so there's no coating on top to peel.
Stained Concrete Flooring
Stain gives you color that sits in the slab instead of on top. We seal it afterward, because unsealed stain wears through where people walk most.
Terrazzo Flooring
Terrazzo sets chips of glass or stone into a binder that we grind and polish smooth. That makes it a hard-wearing choice for lobbies, entries and busy commercial floors.
Basement Flooring
Basement slabs can push moisture up into a coating, so we test the concrete before we pick a system. If the floor isn't ready, we'll tell you straight.
Concrete Grinding & Surface Preparation
Grinding opens up the surface and takes off weak concrete, old sealer and stains. It's the step that decides whether a coating sticks, so it's where we take our time.
Concrete Sealing
A good sealer keeps oil, water and grime from soaking into bare concrete. On a sound patio or garage, it's sometimes all you need instead of a full coating.
Concrete Resurfacing & Overlays
Some slabs are pitted, flaking or patched but still solid underneath. A thin overlay gives them a new, even surface without the mess of tearing them out.
Self-Leveling Concrete & Overlays
Self-leveling overlay flows out to fill dips and low spots. It's how we flatten an uneven slab before tile, vinyl or a coating goes down over it.
Pool Deck Coatings & Resurfacing
Pool decks take sun, chlorinated water and bare feet. We fix the cracks first and finish with a textured coating that gives better grip when the deck is wet.
Concrete Floor Stripping & Removal
Old peeling epoxy, paint, tile adhesive and carpet glue have to come off before anything new can bond. So we strip or grind the floor back to clean concrete.
Get a written estimate for your Marina floor
Send the form and we'll reply within one business day to set up a visit. The estimate is free, it's done on site, and there's no obligation.
I measure and test the slab
I come out to look at the floor, measure it and test the slab. What's going on in the concrete decides which coating will hold and how much prep it needs.
Your estimate in writing
You get the estimate in writing, so you can see what you're paying for. If a simpler option like sealing or polishing suits your floor better, I'll tell you.
Who's on your job
Our crew does the work, with my lead installer running the job and me checking in on site. We're licensed and insured, and the work is backed by our satisfaction guarantee.
Marina permit and inspection questions
Here's what the city's rules mean for a floor job in Marina, from whether you need a permit to how inspections get booked.
Do I need a permit to epoxy my garage floor in Marina?
The city's list of building permits doesn't answer that directly. It names work like new construction, ADUs and kitchen and bathroom remodels, but not floor coatings. So we don't guess. When a job might need a permit, we check with the Building Division before we start, and if one's needed, we take care of the paperwork with you.
What plans does a building permit need in Marina?
Most building permits in Marina need a plot plan drawn to scale, a foundation plan, a floor plan, exterior elevations showing each side of the house, and framing details. They're all submitted online through the city's permit portal. For a floor coating on its own, we'd ask the division whether any of that applies before anyone spends money on drawings.
How do I book a building inspection in Marina?
Building inspections in Marina are by appointment only, Monday through Friday, and you have to book at least 24 hours ahead. You get a morning window from 8 to noon or an afternoon window from 1 to 4, not a set time. Don't let it slide, because a permit expires if the project hasn't passed a required inspection within a year.
Cities where we do flooring work
These cities have their own page on our site, but they aren't the only places we work. If yours isn't listed, call or send the form and ask.
Book a look at your Marina floor
We pick up the phone seven days a week, so call (831) 204-4420 or send the form whenever it suits you.