Epoxy Floor Coatings
A tough, glossy coating for garages, laundry rooms and workspaces, rolled over concrete we've ground and cleaned first so it bonds to the slab instead of to dust.
Flooring contractor in Seaside, CA - concrete floors prepped right, then coated
Truefinish Monterey Epoxy Flooring is a flooring contractor based in Monterey, and we coat, polish and resurface concrete floors in Seaside, from home garages and basements to patios, pool decks and busy shop floors.
What flooring work looks like in Seaside
Seaside is right next door to Monterey, so it's a short drive for our crew, and a lot of the calls look like the ones we get at home. You've got older houses and newer builds close together, and plenty of the work is garage slabs with years of oil stains and hairline cracks, plus patios that have gone dull and shop floors that take carts and foot traffic all day. We do the same work up in Marina and inland in Prunedale, but no two slabs get prepped quite the same way.
Price mostly comes down to the slab, so the size of the floor, how much grinding and crack repair it needs, whether an old coating or sealer has to come off and which system you pick all count, with a sealer or polish usually costing less than a full flake or metallic coating. The schedule turns on that same prep plus cure time between coats and how soon you can clear the room, and the written estimate puts your own numbers on all of it.
I test the slab first
I come out myself to look at the floor, measure it and test the slab, because what's underneath decides the prep, and rushed prep is why most floors peel or bubble.
My lead installer runs the job
Our crew does the work with my lead installer in charge, and I'm on site checking in along the way, so the person who saw your floor first stays involved.
Straight talk on simpler options
If a sealer or a polish suits your floor better than a full coating, I'll tell you, because I'd rather you pay for what you need than for what sounds fancy.
Floor coatings and concrete work we do in Seaside
Commercial & Industrial Epoxy Floor Coatings
For shops, warehouses and kitchens around Seaside that see carts, forklifts and spills, we lay thicker coating systems built to handle heavy wheels and harsh cleaners.
Garage Floor Coatings
Most Seaside garage calls start with oil stains, tire marks and hairline cracks, so we degrease, grind and fill those before laying a flake or solid-color coating that sweeps clean.
Polyaspartic Floor Coatings
A faster-curing coating, so you're usually back in the garage sooner than with standard epoxy, though it sets fast enough that our crew mixes small batches and works in sections.
Metallic Epoxy Flooring
A swirled, pearly finish people pick for home gyms, bonus rooms and show garages, worked by hand so no two look alike, over a slab ground smooth because metallics show every dip.
Urethane Cement Flooring
Built for commercial kitchens, breweries and food shops where hot washdowns and spills would wear out a thinner coating, troweled on thick with texture for grip when the floor's wet.
Polished Concrete Flooring
If your slab is in decent shape, we grind and polish the concrete itself to a sheen, which suits shops, offices and modern homes and leaves no coating to wear through.
Stained Concrete Flooring
Concrete stain adds color to patios, entries and interior slabs, and since it soaks in instead of sitting on top, old patches and marks show through, which some people like.
Terrazzo Flooring
For lobbies, storefronts and the occasional custom home floor, we pour terrazzo with chips of stone or glass in the mix, then grind it flat so the pattern comes up clean.
Basement Flooring
Basements and below-grade rooms get a moisture test first, because water vapor coming up through the slab is what lifts most basement coatings, and the result decides which system we use.
Concrete Grinding & Surface Preparation
This is the step I care about most, grinding the top off the slab to open it up so a coating can grab, and we run dust collection on the grinders.
Concrete Sealing
A clear sealer is the simple option for driveways, patios and garage floors that just need protection from stains, and it's what I'll suggest when a full coating would be overkill.
Concrete Resurfacing & Overlays
When a patio, walkway or slab is pitted or scaled but still solid underneath, a thin cement overlay gives it a new surface without tearing out the concrete and pouring again.
Self-Leveling Concrete & Overlays
Older slabs with dips, humps or low spots get a pourable self-leveling layer that flattens itself out, so tile, wood or a coating can go down on a flat floor.
Pool Deck Coatings & Resurfacing
Pool decks around Seaside homes and complexes get resurfaced or coated with textured finishes that give bare feet some grip, and we repair cracks and chipped edges before the new surface goes on.
Concrete Floor Stripping & Removal
Failing epoxy, old paint, tile adhesive or carpet glue has to come off before anything new goes down, so we grind or strip it to bare concrete and haul it away.
Get a written estimate for your Seaside floor
Tell us about your floor and we'll reply within one business day to set a visit, then I come out to measure and test the slab, and you get a free written estimate with no obligation.
What to tell us
Describe the room, its rough size and what's on the floor now, like old paint, oil stains or carpet glue, so I show up knowing what kind of prep to look for.
Business owners, mention your hours
If it's a shop or commercial space, tell us when the floor can be shut down, because that shapes how we stage the prep and coats around your business.
Licensed, insured, since 2013
We're licensed and insured, our work is backed by our satisfaction guarantee, and we've been coating concrete since 2013, so your floor won't be anybody's practice run.
Seaside permit, license and code questions
These are the practical questions that come up before a floor project in Seaside, answered the way I'd answer them in your garage.
Do I need a permit for an epoxy floor or concrete coating in Seaside?
Check with the city first, because Seaside's Building & Code Enforcement Department recommends asking it before any building project or major repair whether the work needs a permit. Its Permits & Inspections counter is in City Hall. When a job might need one, we check with that office before we start, and if a permit's needed we take care of the paperwork with you.
Does a flooring contractor in Seaside need a California state license?
Usually yes, because California's Contractors State License Board requires one when a project needs a building permit, uses any additional workers, or adds up to $1,000 or more in labor and materials on one or more contracts. A bigger job can't be broken into smaller contracts to get under that line. Ask anyone you're thinking of hiring about theirs, us included.
Which building codes apply to a flooring project in Seaside?
Any project submitted to the city now has to meet the 2025 California codes plus Seaside's own local amendments, a set that covers the building, residential, electrical, energy and fire codes, among others. If your floor is part of a larger remodel, that's the rulebook the whole project answers to, so bring it up when you ask the city about a permit.
Cities where we coat and polish floors
Besides Seaside, these cities have their own pages, and they aren't the only places we work, so if your address isn't listed, call or send the form and ask.
Tell us what your floor needs
Call (831) 204-4420 or send the form, because once I've seen the slab you'll know whether it needs a simple sealer or a full coating.